Ekspert Techniczny
Dołączył(a): 19.11.2009, 21:35 Lokalizacja: Brzeg, Ruda Śląska, Oława, Wrocław Posty: 2122
Podziękował: 7
Pomógł: 154
Silnik: CAYB-1.6 TDI 90KM
Skrzynia: KFK - 5b.
Samochód: Fabia II Monte Carlo 133 KM/336Nm
Rok prod.: 2011
Województwo: opolskie
|
Re: sonda szerokopasmowa stoi
Wskazania w grupie 30 są prawidłowe.
Tu masz podpowiedzi z label VCDS
030,0,Lambda Control (Sensor Status) 030,1,Bank 1,Sensor 1,1xx = Lambda Sensor Heating on\nx1x = Lambda Sensor ready\nxx1 = Lambda Control active 030,2,Bank 1,Sensor 2,1xx = Lambda Sensor Heating on\nx1x = Lambda Sensor ready\nxx1 = Lambda Control active ; 031,0,Lambda Control (Lambda Sensor Voltages) 031,1,Lambda Control,Bank 1 (actual) 031,2,Lambda Control,Bank 1 (specified) ; 032,0,Lambda Control (Mixture Adaptation) 032,1,Adaptation (Idle),Bank 1 Sensor 1,Range: -25.0...+25.0 %\nSpecification: -10.0...+10.0 % 032,2,Adaptation (Partial),Bank 1 Sensor 1,Range: -25.0...+25.0 %\nSpecification: -10.0...+10.0 % ; 033,0,Lambda Control 033,1,Lambda Control,Bank 1 Sensor 1,Range: -25.0...+25.0 %\nSpecification: -15.0...+15.0 % 033,2,Sensor Voltage,Bank 1 Sensor 1,Range: 0.0...5.0 V ; 034,0,Lambda Control (Aging Check: Bank 1 Sensor 1) 034,1,Engine Speed,(G28),Range: 0...6600 RPM\nSpecification (Idle): 740...940 RPM 034,2,Catalytic Converter,Bank 1 Temp. 034,3,Periodic Time,Bank 1 Sensor 1,Range: 0.0...2.0 s\nSpecification: 0.0...1.0 s 034,4,Result,Lambda Aging,Range: Test ON/Test OFF/B1-S1 not OK/B1-S1 OK\nSpecification: Test OFF ; B034,0,Lambda Control (Aging Check: Bank 1 Sensor 1) ; "Activate" Basic Setting ; Firmly press Brake Pedal and Throttle Pedal at once ; Engine Speed increases automatically > Field 4 = Test ON ; Wait until Field 4 shows "B1-S1 OK" B034,1,Engine Speed,(G28),Range: 0...6600 RPM\nSpecification (Idle): 740...940 RPM\nSpecification (Basic Setting): ~2200 RPM B034,2,Catalytic Converter,Bank 1 Temp. B034,3,Periodic Time,Bank 1 Sensor 1,Range: 0.0...2.0 s\nSpecification: 0.0...1.0 s B034,4,Result,Lambda Aging,Range: Test ON/Test OFF/B1-S1 not OK/B1-S1 OK\nSpecification: B1-S1 OK B034,11,Prerequisites: Ignition ON / Engine ON (Running) B034,12,Firmly press Brake Pedal and Throttle Pedal at once B034,13,Engine Speed increases automatically > Field 4 = Test ON B034,14,Wait until Field 4 shows "B1-S1 OK" ; 036,0,Lambda Control (Sensor Readiness - After Catalyst) 036,1,Sensor Voltage,Bank 1 Sensor 2,Range: 0.0...1.0 V 036,2,Result,Lambda Availability,Range: Test ON/Test OFF/B1-S2 not OK/B1-S2 OK\nSpecification: Test OFF ; B036,0,Lambda Control (Sensor Readiness - After Catalyst) ; "Activate" Basic Setting ; Firmly press Brake Pedal and Throttle Pedal at once ; Engine Speed increases automatically > Field 2/4 = Test ON ; Wait until Field 2 shows "B1-S2 OK" AND Field 4 shows "B2-S2 OK" B036,1,Sensor Voltage,Bank 1 Sensor 2,Range: 0.0...1.0 V B036,2,Result,Lambda Availability,Range: Test ON/Test OFF/B1-S2 not OK/B1-S2 OK\nSpecification: B1-S2 OK B036,11,Prerequisites: Ignition ON / Engine ON (Running) B036,12,Firmly press Brake Pedal and Throttle Pedal at once B036,13,Engine Speed increases automatically > Field 2/4 = Test ON B036,14,Wait until Field 2 shows "B1-S2 OK" AND Field 4 shows "B2-S2 OK
Jeszcze pytanie czy jakiś błąd się pojawia? I jak wyglądają świece? Czarne czy kawa z mlekiem????
_________________ Chcesz doposażyć swój samochód od strony elektrycznej? Zapraszam do mnie. Doświetlanie statyczne, dynamiczne, ESP, TMP, tempomat, PDC, OPS i inne cuda. Montaż oraz kodowanie. Pisz a na pewno pomogę. Robię mechanikę jak i elektrykę..
|